Monnit Serial MODBUS Betriebsanweisung Seite 11
- Seite / 36
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
- 11 -
3.3 Communication Defaults
MODBUS slave ID or MODBUS address: 95 or 0x5F
MODBUS-RTU, 8 data bits, No Parity, 1 Stop bit (8-N-1),
19200 baud
3.4 Communication Settings Reset Jumper
MUST OPEN ENCLOSURE TO ACCESS
If the device’s communications settings are unknown, it is
possible to reset the communication settings by placing a
jumper on the RESET jumper position when the gateway is
not powered. This jumper is scanned at power up or reset.
Open jumper: Normal operation, Wireless and
MODBUS communications allowed to function.
Closed jumper: Communications interface reset.
If the jumper is detected closed, the device must be power-
cycled, with the jumper in the open position, before the
device is allowed to operate normally. During COM reset
the “Wired” indicator light will flash red indicating that the
reset procedure is happening.
3.5 Factory Reset Jumper
MUST OPEN ENCLOSURE TO ACCESS.
While in communication reset state, if the device remains
powered and the reset jumper is deliberately removed and
replaced twice, a factory reset will occur on the device.
All
indicators will flash red quickly (5x/sec) indicating that the
device has been successfully reset.
Power-cycle the device
with the jumper in the open position to allow normal
operation.
NOTE:
a factory reset will remove all known sensors and
settings from the device.
- User’s Guide 1
- Contents 2
- Features 5
- Example Network Integration 5
- Hardware 7
- Indicator Light Sequences: 9
- 3.1 Register Size 10
- 3.2 Multi-byte Formatting 10
- 3.5 Factory Reset Jumper 11
- 4.0 Using the Gateway 12
- Coil and Register Map 12
- 40101 / 100 0 15
- 40102 / 101 43527 15
- (Fast Read Method) 16
- (Advanced method) 17
- (Standard Requests) 18
- Reference 20
- Ref.1 - Gateway Coils 20
- Description 22
- Ref.3 - Gateway Registers 23
- Ref.5 - Fast Read Registers 26
- Error Reporting 32
- Troubleshooting and Support 32
- Warranty Information 32
- Certifications 34
- Canada (IC) 35
Verwandte Produkte und Handbücher für Gateways / Controller Monnit Serial MODBUS
(12 Seiten)Ewent EW-130101-010-N-P manuales
Manuales del propietario y guías del usuario para Los cables hdmi Ewent EW-130101-010-N-P.
Ofrecemos 1 manuales en pdf Ewent EW-130101-010-N-P para descargar gratis por tipos de documentos: Ficha de datos
Kommentare zu diesen Handbüchern